PDA

View Full Version : Bricked! Bricked! Bricked

Jabbacks
12-13-2009, 07:27 AM
Ok, exchanged a V3 for a V3re. Loaded some skins from downloads. But while loading the last skin (MMUS Carbon Skin), I hear a funny noise coming out of my computer. I immediately pulled the usb cable and the sound went off. Later when I restart the phone, it goes into BL mode. So I tried to flash the V3re Repair files (F&B) but before it starts to read the loader, it would turn on and off for like 4 times before it starts to load drivers. After loading drivers it stops @ the Jumper. Cannot erase phone.

In RSD Lite, it powers the phone on/off/on/off/on/off/on/off until I stop it. Cannot read data from phone.

So I performed TP and try to flash the repair files again in blank mode, but it gives a jump error. Looks like it's reading the wrong address when flashing in Blank mode. In normal BL mode, jumper gives no errors.

Is there any other way to flash the repair files. I'm out of ideas after numerous attempts to revive this worthless s??t.

R3442A
OC90
T-Mobile Unlocked

Thanks......
ZeroKnightXZ
12-13-2009, 05:46 PM
Is your battery charged? Do you have updated drivers?
intrigued
12-13-2009, 09:20 PM
are you using the 3.07 moto drivers? What os are you using?
AYANAMI REI
12-13-2009, 11:36 PM
Win7 do is to use the system
AYANAMI REI
12-13-2009, 11:44 PM
Cause this is the case
A friend of students in our school made a forum on your forum and foreign friends to talk to posts he said he is happy to talk with foreign friends and share the address of your forum and then some unpleasant things happened ... .



In this regard, I apologize to everybody
Jabbacks
12-14-2009, 01:51 AM
Not batteries & drivers. Just asking is there any other way around this. Like repairing PDS. Cuz I don't think PDS repair in dis model is available yet unless u use box or something. If it can be unlock by box, then it can be PDS repaired. Box is too expensive.
vermsky
12-17-2009, 10:34 PM
What repair file are you talking about? Is it and RFDI file? Can you still connect in flash mode?
Jabbacks
12-20-2009, 09:10 AM
Yeps, connect in flash mode alright. But when I start RSD Lite, goes on and off repeated ly. In F&B, same thing. Cannot repair PDS due to jump address error (Blank mode & BL mode).
vermsky
12-21-2009, 07:06 PM
Did you try flashing an rfdi file while in blank mode?
Jabbacks
04-09-2010, 09:39 PM
Sorry for delay vermsky, no I have not. Is there any RFDI for V3re? Couldn't find it anywhere. I know of the V3_RFDI ok.

I put this phone away due to frustration of modding it and hearing there's no PDS repair unless you have box.
vermsky
04-12-2010, 06:18 PM
If it still goes to BL, you should be able to flash it. There is no PDS repair available even with the unlock boxes.
Jabbacks
04-13-2010, 02:13 AM
RSD Lite

RSD Lite keeps going on of on of until I unplug usb cable. Seems like it's trying to read something then starts back from the beginning.

F & B

F & B gives the Jump error. It can read loader but cannot go past Jump. What address does your Jump starts and ends with ? What I have here is the same as all other LTE2 phones.