PDA

View Full Version : Help with my Keypad

snoopy.nave
08-26-2007, 10:51 PM
I need help with my keypad, it doesn't always work... The only keys that do all the time are power, 3, 4, 9, left and volume up... Any known solutions?
snoopy.nave
08-26-2007, 10:54 PM
Soemtimes only the power and 3 work
Rotary Parts
08-26-2007, 11:12 PM
well what has happen to make them stop working water, heat etc...
fldodger
08-26-2007, 11:13 PM
You to replace the keymat pad. I though you had a z3.
snoopy.nave
08-26-2007, 11:23 PM
I have both, but I wanted to fixup my V3. I also have had NO water or heat damage. It will work for a while if I hold my volume keys and press them hard for a while, It works for a little while then it won't work and I have to do that again
Jack
08-27-2007, 02:02 AM
Try flashing the Keypad Fix Flex

It may be what you are needing...
fldodger
08-27-2007, 02:04 AM
I forgot about that program. You have nothing to loose
snoopy.nave
08-27-2007, 02:05 AM
Ok, did that. It works a little bit better now
Rotary Parts
08-27-2007, 03:02 AM
wow i forgot about the key pad fix!! good find jack!!
Jack
08-27-2007, 03:30 AM
Do that, and a master reset...you should be fine
snoopy.nave
08-27-2007, 10:28 PM
Even after a MP?
Jack
08-28-2007, 02:28 AM
Yep
snoopy.nave
08-28-2007, 02:59 AM
ok helped a little bit, but still doesn't work all the way
Jack
08-28-2007, 03:32 AM
Sounds like you need a new keymat
snoopy.nave
09-01-2007, 01:57 AM
Any way to make sure of that? I'm cheap... Lol... Its weird because the volume keys are what fixes it... So is it the volume keys or the keymat?
fldodger
09-01-2007, 03:12 AM
Volume keys fix what?
Jack
09-01-2007, 08:07 AM
The volume keys fix your keypad issue? How so?
snoopy.nave
09-01-2007, 06:34 PM
When I FIRMLY press them in repeatably, the keymat will work for a while. Then, they won't work. So, do you think that its the keypad or the volume keys?
fldodger
09-01-2007, 06:39 PM
Take the apart and clean it with compress air. Be careful not blow the the side volume away
Jack
09-01-2007, 08:45 PM
That and I think you have a stuck button/contact...
snoopy.nave
09-01-2007, 10:56 PM
Ok, so take the top cover off, then blow it with compressed air?
fldodger
09-01-2007, 11:33 PM
yes but be careful you don't lose the buttons
snoopy.nave
09-01-2007, 11:44 PM
ok thanks. That is a T3 right? Or is it a T5
fldodger
09-02-2007, 12:11 AM
not sure
snoopy.nave
09-02-2007, 09:19 PM
Ok, found the size
underdogg
09-08-2007, 04:47 AM
Ok, found the size

So what happened, did that fix you mobile?

U-DOGG!!
snoopy.nave
09-08-2007, 04:52 AM
Couldn't find one.... There hard to find
underdogg
09-08-2007, 10:02 PM
OK, if and when you find one let us know!

U-DOGG!!
snoopy.nave
09-09-2007, 01:26 AM
Ok I will