K1 dead white screen

[alan.cba]

Hi I'm from Argentina and I have a moto k1 and N95, the k1 is my girlfriend, the thing is trying to free without tp with the method, the cell stopped working, shows me a white screen, I can not get the boot in I get the rsd s flash neptune LET2 , DO NOT LET ME UPLOAD any firm, acknowledges the Ramldr2 but the latter is disconnected if Tongo something, and I did tp and nothing ... please help !!!!!!!!

Hola soy de Argentina y tengo un moto k1 y N95, el k1 es de mi novia, la cosa es que intentandolo liberar con el metodo sin tp, el celular dejo de funcionar, me muestra una pantalla blanca, no puedo entrar al boot, en el rsd me aparece s flash neptune LET2, NO ME DEJA CARGAR ningun firm, el Ramldr2 lo reconoce pero al segundo se desconecta si tongo algo, ya le hice tp y nada... por favor ayuda!!!!!!!!

[ashothayastan]

MotoKRZR K1:
1) Get the firmware with the removed RSA (as it is to make your own, or where to take - read);
2) to apply to our CG1 firmware patches Don't Crypto PDS.exe and Sec ver prot reg locked.exe;
3) Putting the firmware and sewed into the phone via TP;
OR simply stitches this firmware via the TP.
4) stitches using RAMLDR2 file PDS_K1.bin (through the system or blank-mode Dualboot 3.3 by pressing * + krasnaya_knopka);
5) Turn on your phone. It works.

[ashothayastan]

Why should removal of PCA (a signature firmware): Restores phone after various troubles become easier, you can make changes and additions to the firmware in
as patches, it is possible to put Amateur firmware-monstrpaki

[ashothayastan]

We need:
1. L7e firmware for this (reflesh)
For the K1, this R452F_G_08.03.08R_noRSA_startDB_reflash
or this R4527_G_08.22.11R_noRSA_startDB_reflash
2. Spetsversiya RAMLDR
3. FlashBackup

Make a soft-TP (the most important part of the operation, be sure to strict observance of all items)

1. Phone type in boot-mode: turn off the phone, pinch buttons * and # and press the red
button. On a black screen white letters / numbers of your firmware
Connect the phone to the computer - the program to determine how RAMLDR2 Connect
2. Click the button Set Blank Playing
3. Turn off the program RAMLDR2 and withdraw and insert the cable again
4. The phone will be in the Blank-mode. Run the program RAMLDR2 (to write Boot version 0300)
5. Click Send Loader, the program otpishetsya "ready"
6. Click Write Boot - fill Boot_0AC0_patch.bin program otpishetsya "ok"
Removing it and again insert the battery. Press the red button.
Close the program and run the program RAMLDR2 FlashBackup
7. Stitches above such download firmware in Flash & backup with the selected profile to your phone
Removing it and again insert the battery. Press the red button.
Close the program and run the program from FlashBackup RAMLDR2.
Removing it and again insert the battery. Press the red button.
8. The program RAMLDR2 Click Send Loader, the program otpishetsya "ready";
9. Click Write Boot - fill Start_SW.bin (program again must unsubscribe OK.)
Take out / insert the battery and turn on the phone.

Everything! You have removed RSA preserving all settings.


How do I know if you get one from RSA? Sign in boot - mode: turn off the phone, pinch * and # button and press
the red button.

[kyo_kusanagi]

amigo hasle un test point para te lo reconosca y primero antes de todo carga la bateria o de nada te servira todo ese trabajo ya he revivido como 5 de esos telefonos y te aseguro que lo primero es la carga de la bateria saludos y suerte ...