White Screen - Nothing

[sky444]

ok I've done it now I guess.

White screen - nothing else - take battery out - white screen.

oh boy :mad:

[fldodger]

Test Point and PDS repair.

[sky444]

Test Point and PDS repair. Great - how?

[fldodger]

Guide is here
http://www.mmus.us/forum/showthread.php?t=4856

Read the whole thread and use Vermsky Test point. The gold dot.

Other you can PM vermsky and maybe you work something out with him.

[sky444]

what a wonderful day it is - everybody has a t5 screwdriver laying around. This is the last time I do anything to a phone - this sucks

[fldodger]

I have bricked many phones and current have 2 that can not be fix. V6 maxx and V3xx. Unfortunately that is risk we all take.
You had the phone working until you tried to flash a non RSA removed MP to your new RSA remove phone.

[tommy]

At least you can hard TP the phone back to life. Maybe.... If everything goes good that is. You can get a T5 torx at any home depot or lowes. I already have a bunch as I do computer repair. They only cost a couple of dollars.

[sky444]

do you guys happen to know if the phone will charge the battery if I plug it in now? Now all it does is flash a white screen every 10 seconds or so - when I plug it in.

[fldodger]

No it will not.

[sky444]

I take it when I can do this testpoint I can just flash it to any backup right? Is this like starting over with the phone when you do it?

[fldodger]

Start back with RSA removal guide.

[sky444]

fl , thanks for the quick reply. Do I have to do it that way? I was thinking on just putting back my original backup and forgetting all about this rsa removal, it's cost me a phone at the moment I realize it's a risk I took. I don't want to go through this again.

[fldodger]

You can try it first.then if it does not work. You might have through the frist few for the PDS .

[sky444]

You can try it first.then if it does not work. You might have through the frist few for the PDS .

ok so if my backup doesn't work. i need to do the rsa removal again? :o

[sky444]

how much would you charge me to do this ? :D :boh:

[fldodger]

Sorry no can do, against my own forum rules. Contact Vermsky,

[sky444]

well here's the end of my story ,where it says to pull the ribbon out . i did and guess what it broke - amen.

[sky444]

ok even though the ribbon pulled out i went ahead and did the testpoint anyway and i have it connected - instead of RSD saying BLANK it says FLASH and evrything I've tried to send to the phone fails - it trys to send loader and it fails ?

[fldodger]

:boh: I would guess you did not get test point right.

[sky444]

I'm all done with this mon , I followed all the steps to the "TEE" and when I did the last step to write the boot_start - NO MORE POWER. reconnected did everything all over just your supposed to and NO POWER. I give up - I can't even relate that I was dumb enough to ruin my phone. Great group here no doubt ,appreciate all the help with it for sure. I have another Z3 that I can possibly pick up Friday.........will I do RSA removal - NEGATIVE.

[kent_lkc]

sorry to hear that mate, i ruined my v3r too . . . its part of moto modding process.

No bricks No gain.

[clarkey]

^^^ Best motto to live by

[bambangy]

I got this whitescreen problem, then I use the test point method and it works ..
now my Z3 runs nicely :) thanks guys

[mido729]

same problem here

[Jabbacks]

Best solution to the white screen is to flash the Z3_generic_ PDS.bin with ramdldr.