P2K Easy Tool Changed SW Version

[pitbull518]

The phone is a V3R, the sw version was R3443U2_G_0E.C0.17R. I was installing some new skins and had an application error, that what it said on my phones screen. I turned phone off and when I tried to turn it back on it would not, only keypad lit up. The phone would still power up and go to bootloader screen when I pressed *#and on buttons together. I thought that I needed to repair the pds and did so(tp and pds repair using P2K easy tool 3.9). I did that and now the sw version is R4515_G_08.BD.2AR_2 and it still only powers up in boot loader mode. The boot loader is 0A.30 if that matters.

[ZeroKnightXZ]

If your phone was at first R3443U2_G_0E.C0.17R, then you should flash that firmware back to your phone.

[fldodger]

I think you need to find and MP or if you have backup of your original software and flash it that.

[pitbull518]

Flashed MP R3443U2_G_0E[1].C0.17R_PDS005_LP0003_DRM0113_JPJAVA_G_0E_R3443U2_ 00_00_15R_GSVV3xpU5TMB01NA030_1FF and when it got to the part where it reboots phone it went to 100% and told me to manually restart phone. I had to unplug usb and battery and reforce bootloader screen on phone, rsd then said in the progress section that it passed. Phone still only powers up in bootloader mode and the sw version is still R4515. RSD LIte 3.2 is the version that i am using. Any ideas, thanks

[fldodger]

Try to find a Higher version of RSD lite. Try the TP and PSD repair again make sure you have the PSD file.Then flash it again

[pitbull518]

Well this is odd but it worked. I took out battery, reinstalled battery and pressed *#and red power botton to get it to bootloader screen as usuall, then i pressed the red power botton and turned phone off, I then pressed green button for about 5 seconds then pressed red power botton and phone turned on. I then reflashed phone with before mentioned mp with rsd lite 3.2 and phone is 100% again. I hope this is of help to others, it worked for me but I cant explain why. If someone has better insight in the matter than I do, I would like to know exactly what was going on with it so myself and others are more clear on the matter. Thanks as always to the phone gods here, and this site rocks!!!!

[ZeroKnightXZ]

Congrats on getting it back to normal :thumbup:

[fldodger]

Congrats, :bounce::bravo::yahoo:

[ress]

:thumbup::thumbup::thumbup:

[tkalli]

Glad your v3r is working.
Not sure why.
:boh: