PDA

View Full Version : dead k1 please help

ew3ah
02-07-2009, 10:33 PM
i've tried to remove rsa from my k1 from russian web site by ramldr2
then the phone didn't make a light after that please help
ithink i've send to the mobile wronge bootloder :(

now it's only go to white screen when i press (* + # ) etc
.0


after doing TP
now i have a new error
that k1 write in it screen
n
bootloader
0A.B2.
SW version :
Not Found

PH SIG ERR:
39:02:

OK to prog ..... etc
fldodger
02-07-2009, 10:37 PM
You will have to do test point
ew3ah
02-07-2009, 10:56 PM
how ?
ew3ah
02-07-2009, 10:58 PM
i found the z3 guide but i didn't find k1 guide
fldodger
02-07-2009, 11:16 PM
You will need a guide for K1. we will look
fldodger
02-07-2009, 11:26 PM
Here is image
ew3ah
02-09-2009, 08:18 PM
i couldn't do the test point till now
and now the phone isn't connecting to pc at all
please help me :(
ew3ah
02-09-2009, 09:08 PM
now in rsd it write every thing N/A
and it cant flash :(
fldodger
02-09-2009, 10:18 PM
It is all about timing. RSD has show Blank S (something)
ew3ah
02-10-2009, 01:55 AM
yes but it write flash failed
anhvu2875
02-10-2009, 02:22 AM
ew3ah (http://www.mmus.us/forum/member.php?u=739)
change another USB hub and give F&B3 a try !
ew3ah
02-10-2009, 06:44 PM
------------------------------------------------------

*** Operation start (2/10/2009 9:43:05 PM) ***
Flash&Backup 3.0.7
Write data: C:\Users\Public\av_k1_r452f.03.08r_v8_edition\AV_K 1_R452F.03.08R_V8_EDITION.shx

Extracting data from firmware file...
Sending the loader...
Done.
Executing JUMP...
Done.
Erasing memory... (Progress of this process is not shown)
Error!
Sending code group: CG1
Error!
Sending code group: CG2
Error!
Sending code group: CG3
Error!
Sending code group: CG4
Error!
Sending code group: CG7
Error!
Sending code group: CG15
Error!
Sending code group: CG18
Error!
ew3ah
02-10-2009, 06:54 PM
and in rsd


failed flashing process .failed flashing process . phone [0000] incompatible superfile for subscriber unitstate 0x430703A ; phone connected

IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x000300
DRM Version: N / A
Phone Type: Production (081008C0190F092B1D8E1651B944)
ew3ah
02-10-2009, 06:59 PM
and i'm using rsd lite v 4.3
anhvu2875
02-12-2009, 09:12 PM
ew3ah (http://www.mmus.us/forum/member.php?u=739)
i can see ur prob in 2 topics , so how exactly ur prob now ?
ZeroKnightXZ
02-13-2009, 03:07 AM
I think you are using a monster pack incompatible with your phone.
vermsky
02-19-2009, 04:36 PM
If you have the phone connected as S Blank, no monster file will work... except an RFDI one (I don't think there is one out there)

You might be better off doing the TP again and paying for GOT service (www.got.bz) to repair your PDS. Just make sure that the phone is supported before you pay.