Help unbricking my Z8..please.

[eddiie817]

So, I was trying out some MP's for the Z8 and I installed the Ferrari, then the Vista MPs and then I went and installed the "Swisscom"one (P2S721_U_50.10.F2G_00000a87_3191u_Z10_Swisscom_SE 9787AXXP3_130408_1.0_1.4_3191_1342008919_sec).
After it restarted, it came up with the Motorola logo, then green screen, then black, then the logo, another color, etc. Now when I try putting the Vista flash back on, it goes ahead and makes the image file (on RSD Lite 4.3) and then it says "phone is not compatible with multi-interface super-file" and fails. I put it in flash mode manually. No flash is getting it back up. What should I do?!

...Thanks

[tankrider]

Welcome eddiie817.
Have you tried flashing the original stock firmware back to the phone?

[Rotary Parts]

well what you have flashed to your z8 is z10 firmware:wck: what you need to do is what tank saying try and flash back to z8 firmware a stock to start with in the z8 section of the forum. you will have to put the phone in bl mode * # and power button all at the same time!!

[eddiie817]

Hey, no, I haven't. it's the TIM f/w. but, i don't know where to get it. i'll look. any other ways it could just flash like it used to??

well what you have flashed to your z8 is z10 firmware:wck: what you need to do is what tank saying try and flash back to z8 firmware a stock to start with in the z8 section of the forum. you will have to put the phone in bl mode * # and power button all at the same time!!

Ok, thanks, i'll go get it.

[Rotary Parts]

is the z8 locked to your network? or unlocked?

[eddiie817]

it was unlocked after i bought it.
i'm downloading this file: http://www.mmus.us/forum/downloads.php?do=file&id=4612
is that the stock one?

[tkalli]

Where MP's you flashed unlocked?

[eddiie817]

I'm not sure, didn't check. :S

UPDATE:
So, I try to do the flash with this (http://www.mmus.us/forum/downloads.php?do=file&id=4612) file and it does the same thing. Here's the Error Log from RSD Lite:

20:47:46, March 07, 2009
Line: 225
ERROR: Phone[0000]: Phone is not compatible with multi-interface super-file.
File: D:\test_dev_usb\flash\code\flashdll\MIFlash.cpp
Device ID: 0

20:47:46, March 07, 2009
Line: 1170
ERROR: Phone[0000]: Flash failed.
File: D:\test_dev_usb\flash\code\flashdll\PST_FP_FlashTh read.cpp
Device ID: 0

20:47:46, March 07, 2009
Line: 584
ERROR: Flash failure: Phone[0000]: Phone is not compatible with multi-interface super-file. (Error Code: 3b),
Detailed Error Details: Direction of the Error=No Direction, Command Value=0, Code Group Number=No Codegroup
File: D:\test_dev_usb\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0

[Rotary Parts]

try to flash this http://www.mmus.us/forum/downloads.php?do=file&id=4615. also are you flashing with rsd lite? if so what version. well the swisscom f/w is not locked.

[eddiie817]

im flashing with RSD Lite 4.3
when in bl mode, it says: MNS 7.2 Flash Loader. it used to say something else when it was fine...hmm...

I tried flashing it with the foxmod mp and it's the same. it just looks like it doesn't even proceed to flashing, just makes the image files. is there another mode i can go to?

[Rotary Parts]

Espoo flashloader version 46.02.16 ap support <--- this is what it should say you have flash a diff b/l to the phone mate. sorry to say but there is no turning back you will have to send phone for repair!!

[eddiie817]

argh...alright, i'll be back to write out what was wrong and what they did to fix it .

[khetzal]

Hello, i've made the same error here :/ If you have any solution...