Help with P2kTools V3

[snoopy.nave]

When I use P2kTools V3, it locks up, or it says code read error of something like 0000000000033. What can I do to fix this? It also does not let me access my memory card from the usb connection or anything else from USB besides charge the phone.

[fldodger]

Are using this one
http://www.mmus.us/forum/downloads.php?do=file&id=2004 (http://www.mmus.us/forum/downloads.php?do=file&id=2004)

Does the program recognizes your phone?
http://img114.imageshack.us/img114/3272/p2t1dh7.gif (http://imageshack.us)

If you get the green light at the bottom you are connected. If not you need to install driver.

If you do then click the refersh button
http://img512.imageshack.us/img512/8803/p2k2cj9.gif (http://imageshack.us)

then you will see the different section a-b-c

[snoopy.nave]

yes, and then when I go to hidden settings, it takes about 6 minutes to load, if it does work, or if not, nothing will recognise it

[snoopy.nave]

the full error is: "Access violation at address 0000003c. Read of address 0000003c.

[fldodger]

Is Your T-mobile branded?

[fldodger]

Okay Plug mine in again and went hiiden setting.
http://img360.imageshack.us/img360/5888/p2kt3qj5.gif (http://imageshack.us)
Shot at 2007-07-04

Try deleteing the program and download and extract again. Reboot pC and then try program again.

[snoopy.nave]

My phone is an unlocked Rizr Z3 from Hong Kong, I think. It is unbranded and unlocked and I am using CellularOne

[snoopy.nave]

Ok, i Did that, still no dice so far

[araeff]

Ok, i Did that, still no dice so far

Try the latest one, P2KTools 3.0.7 Build 759. If still cant there might be something wrong with the hardware or driver.

[snoopy.nave]

I tink it might be the driver, because it will work for a while, then it will not work at all... How can I COMPLETELY DELETE the OLD drivers?

[fldodger]

Did you try install the new one over the old ones?

[snoopy.nave]

I think so, i got the executable driver files, and when I connect It, it automaticly installs the drivers that I dont want.

[fldodger]

If want to install them you need them. There are 4-5 drivers need for the phone.

[snoopy.nave]

Ok, how do I remove the old ones?

[snoopy.nave]

I also assume that it needs to be in data connection mode right?

[fldodger]

Yes in data connections. As far removing the old driver :oops: I don't know how. I hope one of thestaff or member can better assist you with that.

[snoopy.nave]

OK. thnx. Also, why is it that my micro transflash cannot be read on the phone, but can on my mem card reader? Is it a driver conflict?

[Rotary Parts]

Well you need to unistall old drivers then remove the reg key from it to . then reinstall the new drivers. remeber you must use the new drivers being that your phone is a z3. we have them on this site right here!!
http://www.mmus.us/forum/downloads.php?do=cat&id=171 (http://www.mmus.us/forum/downloads.php?do=cat&id=171)

[fldodger]

Use your phone to format the card. You have to switch to memory card.

[snoopy.nave]

Ok, what are the names of the drivers, Can i search for them on my Computer and just delete them, then install the new ones?

[fldodger]

cdma1x.inf-motblan.inf-motcompXP.inf-USBMOT2000.INF and P2k.sys
It could be one or all of these.

[snoopy.nave]

ok thanx fldodger

[snoopy.nave]

also, what is the best program for the rizr

[fldodger]

Here are few
P2k tools 3.0.7.759 for looking at files ,editing seems, adding files and just becareful not delete something you shouldn’t. http://www.mmus.us/forum/downloads.php?do=file&id=1988 (http://www.mmus.us/forum/downloads.php?do=file&id=1988)

Skin manager for adding and deleting skins (DO NOT DELETE ANY OF THE SKINS THAT CAME WITH PHONE) also can be used to upload and delete images. http://www.mmus.us/forum/downloads.php?do=file&id=2021 (http://www.mmus.us/forum/downloads.php?do=file&id=2021)

[snoopy.nave]

Can you put funlihgts on the Rizr?

[fldodger]

Yes there are few.

[snoopy.nave]

Ok, can you tell me how? aLSO, is it possible to install skins using a transflash card?

[fldodger]

Funlight thing I will have to look into it. I don't use them or the phone, I bought mind just to make skin-drm and LP packs for memebers.

Second question not that I am away of.

[snoopy.nave]

Thnk you. I am also pissed because no matter what I do w/ p2ktools 3, it wont work, i get a violation access error

[fldodger]

Try one of the P2k Commander

[snoopy.nave]

when i use any program, it will make my phone blank out and freeze at 2% on the loading any known solutions?

[fldodger]

Do you have rsd lite?

[snoopy.nave]

yes

[fldodger]

Try opening that in the background and run one of the other program