View Full Version : R26111MLD FB3 Profile and Loader
vermsky
07-13-2007, 09:18 PM
The FB3 Loader and Profile has been made for the AT&T R26111MLD. Now you can backup your phones :D
http://www.4shared.com/dir/3246338/97660da1/ATT.html
Thanks to MotoCat for helping me correct the addresses!
I have tested this myself and it works. I backed up with FB3 and flashed it with RSD Lite.
Enjoy!
fldodger
07-13-2007, 11:00 PM
Thanks I know there are some that was waiting for this
Dmatthew
07-16-2007, 04:12 AM
Thanks for the share monkey.. great stuff
vermsky
07-16-2007, 04:22 PM
There is now no need for this information since Random has released FB 3.06 :D
kent_lkc
07-24-2007, 02:47 PM
but for info is ok, right ? :D
araeff
07-24-2007, 02:54 PM
Agree, great info... Modding is Learning.
vermsky
07-24-2007, 04:30 PM
Check out this guide on how to create the FB3 profile from a flashfile. http://motomodding.us/viewtopic.php?t=992
underdogg
08-14-2007, 06:13 PM
Check out this guide on how to create the FB3 profile from a flashfile. http://motomodding.us/viewtopic.php?t=992
Vermsky I have F&B3 v. 3.6 and it has the AT&T loder listed as 0306 should that be 0308, my other new phone is Bootloader v.0308.
U-DOGG!!
vermsky
08-14-2007, 06:17 PM
0306 is the RAMDLD version and not the bootloader. To check, open the loader with winhex. offsets 1E and 1F contain the version.
underdogg
08-14-2007, 06:22 PM
Reading too much into it you are so right. But can I load DRM's to this phone with bootloader 0308?
U-DOGG!!
underdogg
08-14-2007, 06:25 PM
0306 is the RAMDLD version and not the bootloader. To check, open the loader with winhex. offsets 1E and 1F contain the version.
Is the AT&T profile listed for the R26111MLD-AS_U_96.BO.OARMLD software or is it for the R26111MLD-AS_U_96.BO.OARLD version.
U-DOGG!!
vermsky
08-14-2007, 06:26 PM
It shouldn't be a problem. Make sure you have both the backup and the original MLD flashfile handy. Sometimes 1 works but not the other.
The AT&T profile is for the MLD. The Cingular profile is for the LD.
The AT&T profile was taken from this R26111MLD-AS_U_96.B0.0AR_LP0063_DRM0011_VSTU_207_01030D0F_JP US_R26111IZRGBLCIN_21_USIZRGBLATTUSAR26111019_1FF
underdogg
08-14-2007, 06:28 PM
It shouldn't be a problem. Make sure you have both the backup and the original MLD flashfile handy. Sometimes 1 works but not the other.
The AT&T profile is for the MLD. The Cingular profile is for the LD.
I dont want to flash over my S/W I want to load a DRM and it is not letting me.
U-DOGG!!
vermsky
08-14-2007, 06:29 PM
Is your SW version is LD_AS or MLD_AS?
underdogg
08-14-2007, 06:31 PM
I figured it out the DRM has the RAMDLD for the cingy I have to change this. My BADD!!
U-DOGG!!
underdogg
08-14-2007, 06:31 PM
Is your SW version is LD_AS or MLD_AS?
MLD_AS
vermsky
08-14-2007, 06:37 PM
Glad you worked it out!
underdogg
08-14-2007, 06:44 PM
Glad you worked it out!
Yea had a brain cramp! Got a phone last week it had this software on it R26111LD-AS_U_96.BO.OAR, and this one has this on it R26111MLD-AS_U_96.BO.OAR. I did not pay any attention to it at first they are so close I almost missed it.
U-DOGG!!
kunal78
04-24-2010, 07:57 AM
V3xx Turk?e flash
Software Version :R26111MLD-AS_U_96.B0.0FR
help acil
vBulletin® v3.7.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.