PDA

View Full Version : V3xx Flex


wbeverett
05-26-2009, 11:35 PM
Flex: USIZRGBLATTUSAR26111019
Firmware: R26111LD_AS_U_96.B0.0AR
Boot Loader: 03.02

I am trying to fix a friends phone that does not boot. Hope to Flex it but having trouble finding it.

Any help will be appreciated.

fldodger
05-26-2009, 11:53 PM
Can you get into Bootloader mode

tkalli
05-26-2009, 11:55 PM
SEE HERE (http://www.4shared.com/file/66461126/82bfc39b/R26111LD-AS_U_96B00AR_LP0063_DRM0011_VSTU_207_01030D0F_JPUS _R26111IZRGBLCIN_21_USIZRGBLATTUSAR26111019_1FF.ht ml?s=1)
Not sure what boot loader it is.
Check with Kameirus. You can PM him.

wbeverett
05-26-2009, 11:57 PM
I can get to boot loader. That is where I got the Firmware and boot load info.
Ran Flash&Backup to obtain existing Flex info.

fldodger
05-27-2009, 12:10 AM
Here is Stock flash (FF). I would Flash the whole thing.

Download HERE (http://www.mmus.us/forum/downloads.php?do=file&id=5416)

Same file Mr.T posted. But I uploaded it server.

wbeverett
05-27-2009, 12:23 AM
After installing the link tkalli provided I started the phone and obtained this information from phone status>>other info:

Flex: USIZRGBLATTUSAR26111019
Technology: Dual Mode UMTS
S/W Ver: R26111LD-AS_U_96.B0.0AR
DSP S/W Ver: 51670000
Language List: 0063
Operator: Cingular`
Data Ready and Browser Ready
When I go into Boot Loader Mode the screen reports Bootloader 03.02
Factory Skins: AT&T, Disco, Indium

I would say this is exactly what I was looking for.

The network I referred to, the phone did not find the Cingular/AT&T network.
After several minutes of "Searching for Network" it finally goes to the home screen
with no operator and no bars on the antenna graphic.

I don't have a clue what to do about that.

fldodger
05-27-2009, 12:33 AM
What Network?

Kameirus
05-27-2009, 01:28 AM
ill be here in the morning
i have to go to work now
if you still need help let me know

fldodger
05-27-2009, 09:23 AM
Make sure you are using a valid Sim card.
Go to network setting> check in there. Set to to different bands and see if it pick up something.

kent_lkc
05-27-2009, 10:55 AM
>
After installing the link tkalli provided I started the phone and obtained this information from phone status>>other info:

Flex: USIZRGBLATTUSAR26111019
Technology: Dual Mode UMTS
S/W Ver: R26111LD-AS_U_96.B0.0AR
DSP S/W Ver: 51670000
Language List: 0063
Operator: Cingular`
Data Ready and Browser Ready
When I go into Boot Loader Mode the screen reports Bootloader 03.02
Factory Skins: AT&T, Disco, Indium

I would say this is exactly what I was looking for.

The network I referred to, the phone did not find the Cingular/AT&T network.
After several minutes of "Searching for Network" it finally goes to the home screen
with no operator and no bars on the antenna graphic.

I don't have a clue what to do about that.

i have no clue either, your v3xx having USA AT&T flex and you said no network found.

wbeverett
05-27-2009, 11:34 AM
The sim card that I am using is my AT&T 3G card from my current service provider.
I swap it between my V3xxr, my V3re then into this V3xx.
I am able to make calls and everything in my two phones but not from the V3xx.

In this V3xx that I am working on and my V3xxr I only have two choices
under settings>network: Service Tone and Call Drop Tone

In my V3re under Settings>network I get several options:
new network, network setup, available networks, my network list, service tone, network jingle, and call drop tone.

Kameirus
05-27-2009, 12:17 PM
do you want to try one of my MPs to just see if it works then

wbeverett
05-27-2009, 12:19 PM
Send me a link.

Thanks!

Kameirus
05-27-2009, 12:20 PM
ok try this

http://www.4shared.com/dir/9911861/418b6e5/MPsharing.html

remember to have phone fully charged

wbeverett
05-27-2009, 12:23 PM
trying it now

Be back soon


Cool MP but there is something wrong with this phone.
Even after trying different network settings with this new MP phone will not link to AT&T.
Got some cool graphics. And the rotating lights while charging, excellent.

Thanks!


Friend of mine at work found it on the road somewhere. In good shape, thought I could get it to work for him. Does not show any serious impact damage. Would not start up when he gave it to me and after two flashes it will startup but not find AT&T. It knows the difference between having a valid sim card or not. Thanks for the help. If you have any ideas let me know otherwise I may take it back to him later today.

Kameirus
05-27-2009, 12:23 PM
try the new link i posted in above post

Kameirus
05-27-2009, 01:26 PM
ok well we tried my MP idea and still he isnt getting connected to att
im at a loss now
anyone else with any clues

kent_lkc
05-27-2009, 03:51 PM
trying it now

Be back soon


Cool MP but there is something wrong with this phone.
Even after trying different network settings with this new MP phone will not link to AT&T.
Got some cool graphics. And the rotating lights while charging, excellent.

Thanks!


Friend of mine at work found it on the road somewhere. In good shape, thought I could get it to work for him. Does not show any serious impact damage. Would not start up when he gave it to me and after two flashes it will startup but not find AT&T. It knows the difference between having a valid sim card or not. Thanks for the help. If you have any ideas let me know otherwise I may take it back to him later today.

Check and see whether imei was blacklisted by AT&T/Cingy !

Kameirus
05-27-2009, 04:06 PM
i didnt even think of that

tkalli
05-27-2009, 04:09 PM
Me, neither. Thanks, kent.
Owner may have reported it.

wbeverett
05-27-2009, 04:13 PM
How do check to see if imei was blacklisted by AT&T/Cingy ? This phone has the Cingy Logo on battery case.

I googled and found http://www.howardforums.com/showthread.php?referrerid=295219&t=1417970 (http://www.howardforums.com/showthread.php?referrerid=295219&t=1417970)

08-16-2008, 17:16
JaxGrim (http://www.howardforums.com/member.php?u=862847) http://207.218.242.35/default/images/statusicon/user_offline.gif
Joined: Aug 2008
Posts: 218

We do not block IMEIs. I saw that option on the switch I work on and blacklisting/greylisting is inhibited.

Also, I called AT&T and gave them the imei # The lady I spoke with was very helpful. She could not find any reference to this imei # and after some discussion pointed me to the liquid damage indicator which happens to be a beautiful RED which she stated ment this phone got wet which may have led to the existing problem.

Thanks ALL !!!

Kameirus
05-27-2009, 04:23 PM
you would have to call att and ask them

fldodger
05-28-2009, 09:29 AM
Oh well, the phone is a good testing phone.